Design of illumination system using characterized illuminances for smartphone-based fundus camera

Recently, smartphone-based fundus camera (SBFC) research has been actively conducted in response to the need to expand medical infrastructure in underdeveloped countries and the increased telemedicine since the COVID-19 pandemic. Compared to the conventional table-top system, SBFCs have technical challenges that make it difficult to guarantee uniform illumination and avoid back-reflection because of the design constraints of minimizing the form factor and cost. This paper proposes a novel illumination design methodology using characterized illuminance to obtain high-quality fundus images for SBFCs. Key performance indicators (KPIs), such as retinal uniformity, back-reflection suppression, and optical efficiency, were defined to evaluate the performance of the illumination system. Each KPI was calculated using optical simulation software based on Monte-Carlo ray tracing and mapped into a normalized three-dimensional coordinate, the retinal illumination performance space (RIPS). In RIPS, the KPIs are combined into a single parameter [Formula: see text] , which is the quantitative difference evaluated as the Euclidean distance between the ideal and actual design point. A compact SBFC illumination system with five design variables was presented to verify the proposed methodology. The final design values at the minimum [Formula: see text] were determined using the Taguchi method and response surface methodology. Finally, a working prototype was built, and fundus images were acquired by clinical testing under institutional review board approval. The fundus image had sufficient brightness and resolution to diagnose the lesion with a viewing angle of approximately 50° in one shot.