Charge Recombination Deceleration by Lateral Transfer of Electrons in Dye-Sensitized NiO Photocathode

[Image: see text] Control of charge separation and recombination is critical for dye-sensitized solar cells and photoelectrochemical cells, and for p-type cells, the latter process limits their photovoltaic performance. We speculated that the lateral electron hopping between dyes on a p-type semiconductor surface can effectively separate electrons and holes in space and retard recombination. Thus, device designs where lateral electron hopping is promoted can lead to enhanced cell performance. Herein, we present an indirect proof by involving a second dye to monitor the effect of electron hopping after hole injection into the semiconductor. In mesoporous NiO films sensitized with peryleneimide (PMI) or naphthalene diimide (NDI) dyes, dye excitation led to ultrafast hole injection into NiO from either excited PMI* (τ < 200 fs) or NDI* (τ = 1.2 ps). In cosensitized films, surface electron transfer from PMI(–) to NDI was rapid (τ = 24 ps). Interestingly, the subsequent charge recombination (ps−μs) with NiO holes was much slower when NDI(–) was generated by electron transfer from PMI(–) than when NDI was excited directly. We therefore indicate that the charge recombination is slowed down after the charge hopping from the original PMI sites to the NDI sites. The experimental results supported our hypothesis and revealed important information on the charge carrier kinetics for the dye-sensitized NiO photoelectrode system.