Cargando…
Dynamic Sweep Experiments on a Heterogeneous Phase Composite System Based on Branched-Preformed Particle Gel in High Water-Cut Reservoirs after Polymer Flooding
Heterogeneous phase composite (HPC) flooding technology that is based on branched-preformed particle gel (B-PPG) is an important technology for enhancing oil recovery in high water-cut reservoirs. In this paper, we conducted a series of visualization experiments under the condition of developed high...
Autores principales: | , , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10217512/ https://www.ncbi.nlm.nih.gov/pubmed/37232956 http://dx.doi.org/10.3390/gels9050364 |
Sumario: | Heterogeneous phase composite (HPC) flooding technology that is based on branched-preformed particle gel (B-PPG) is an important technology for enhancing oil recovery in high water-cut reservoirs. In this paper, we conducted a series of visualization experiments under the condition of developed high-permeability channels after polymer flooding, with respect to well pattern densification and adjustment, and HPC flooding and its synergistic regulation. The experiments show that for polymer-flooded reservoirs, HPC flooding can significantly reduce the water cut and increase oil recovery, but that the injected HPC system mainly advances along the high-permeability channel with limited sweep expansion. Furthermore, well pattern densification and adjustment can divert the original mainstream direction, which has a positive effect on HPC flooding, and can effectively expand the sweeping range under the synergistic effect of residual polymers. Due to the synergistic effect of multiple chemical agents in the HPC system, after well pattern densification and adjustment, the production time for HPC flooding with the water cut lower than 95% was significantly prolonged. In addition, conversion schemes, in which the original production well is converted into the injection well, are better than non-conversion schemes in terms of expanding sweep efficiency and enhancing oil recovery. Therefore, for well groups with obvious high-water-consuming channels after polymer flooding, the implementation of HPC flooding can be combined with well pattern conversion and intensification in order to further improve oil displacement. |
---|