Cargando…
Cracking Behavior and Deflections in Recycled-Aggregate Beams Reinforced with Waste Fibers Subjected to Long-Term Constant Loading
This report presents the results of long-term tests on concrete beams reinforced with steel cord. In this study, natural aggregate was wholly replaced with waste sand or with wastes from the production of ceramic products and ceramic hollow bricks. The amounts of individual fractions used were deter...
Autores principales: | , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10220937/ https://www.ncbi.nlm.nih.gov/pubmed/37241248 http://dx.doi.org/10.3390/ma16103622 |
Sumario: | This report presents the results of long-term tests on concrete beams reinforced with steel cord. In this study, natural aggregate was wholly replaced with waste sand or with wastes from the production of ceramic products and ceramic hollow bricks. The amounts of individual fractions used were determined in accordance with guidelines for reference concrete. A total of eight mixtures were tested; these differed in terms of the type of waste aggregate used. Elements with various fiber-reinforcement ratios were made for each mixture. Steel fibers and waste fibers were used in amounts of 0.0%, 0.5%, and 1.0%. Compressive strength and modulus of elasticity were determined experimentally for each mixture. The main test was a four-point beam bending test. Beams with dimensions of 100 mm × 200 mm × 2900 mm were tested on a stand, which was specially prepared so that three beams could be tested simultaneously. Fiber-reinforcement ratios were 0.5% and 1.0%. Long-term studies were conducted for 1000 days. During the testing period, beam deflections and cracks were measured. The obtained results were compared with values calculated using several methods, considering the influence of dispersed reinforcement. The results enabled the best methods for calculating individual values for mixtures with different types of waste materials to be determined. |
---|