Cargando…
A Low-Phase-Noise 8 GHz Linear-Band Sub-Millimeter-Wave Phase-Locked Loop in 22 nm FD-SOI CMOS
Low-phase noise and wideband phased-locked loops (PLLs) are crucial for high-data rate communication and imaging systems. Sub-millimeter-wave (sub-mm-wave) PLLs typically exhibit poor performance in terms of noise and bandwidth due to higher device parasitic capacitances, among other reasons. In thi...
Autores principales: | , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10221577/ https://www.ncbi.nlm.nih.gov/pubmed/37241633 http://dx.doi.org/10.3390/mi14051010 |
Sumario: | Low-phase noise and wideband phased-locked loops (PLLs) are crucial for high-data rate communication and imaging systems. Sub-millimeter-wave (sub-mm-wave) PLLs typically exhibit poor performance in terms of noise and bandwidth due to higher device parasitic capacitances, among other reasons. In this regard, a low-phase-noise, wideband, integer-N, type-II phase-locked loop was implemented in the 22 nm FD-SOI CMOS process. The proposed wideband linear differential tuning I/Q voltage-controlled oscillator (VCO) achieves an overall frequency range of 157.5–167.5 GHz with 8 GHz linear tuning and a phase noise of −113 dBc/Hz @ 100 KHz. Moreover, the fabricated PLL produces a phase noise less than −103 dBc/Hz @ 1 KHz and −128 dBc/Hz @ 100 KHz, corresponding to the lowest phase noise generated by a sub-millimeter-wave PLL to date. The measured RF output saturated power and DC power consumption of the PLL are 2 dBm and 120.75 mW, respectively, whereas the fabricated chip comprising a power amplifier and an integrated antenna occupies an area of 1.25 × 0.9 mm(2). |
---|