The Effect of Chemical Degradation and Polishing on the Gloss of Composite Dental Materials

This aim of this study was to investigate surface gloss changes of different composite dental materials after chemical degradation or polishing. Five different composites were used (Evetric, GrandioSO, Admira Fusion, Filtek Z550, Dynamic Plus). The gloss of the tested material was measured with a glossmeter before and after chemical degradation in different acidic beverages. Statistical analysis was performed using a t-test for dependent samples, ANOVA, and a post hoc test. For comparison between groups, a level of significance was set at 0.05. Initial gloss values ranged from 51 to 93 at baseline to 32 to 81 after chemical degradation. The highest values were obtained for Dynamic Plus (93.5 GU) and GrandioSO (77.8 GU), followed by Admira Fusion (82 GU) and Filtek Z550 (70.5 GU). Evetric showed the lowest initial gloss values. After acidic exposures, the gloss measurements revealed different patterns of surface degradation. The results showed that the gloss of the samples decreased with time regardless of the treatment. The interaction between chemical-erosive beverages and the composite could lead to a decrease in the surface gloss of the composite restoration. The nanohybrid composite showed less gloss changes under acidic conditions, suggesting that it is more suitable for anterior restorations.