Fabrication of Mechanically Strong Silica Aerogels with the Thermally Induced Phase Separation (TIPS) Method of Poly(methyl methacrylate)

Constructing and maintaining a three-dimensional network structure with high porosity is critical to the preparation of silica aerogel materials because this structure provides excellent properties. However, due to the pearl-necklace-like structure and narrow interparticle necks, aerogels have poor mechanical strength and a brittle nature. Developing and designing lightweight silica aerogels with distinct mechanical properties is significant to extend their practical applications. In this work, thermally induced phase separation (TIPS) of poly(methyl methacrylate) (PMMA) from a mixture of ethanol and water was used to strengthen the skeletal network of aerogels. Strong and lightweight PMMA-modified silica aerogels were synthesized via the TIPS method and supercritically dried with carbon dioxide. The cloud point temperature of PMMA solutions, physical characteristics, morphological properties, microstructure, thermal conductivities, and mechanical properties were investigated. The resultant composited aerogels not only exhibit a homogenous mesoporous structure but also achieve a significant improvement in mechanical properties. The addition of PMMA increased the flexural strength and compressive strength by as much as 120% and 1400%, respectively, with the greatest amount of PMMA (M(w) = 35,000 g/mole), while the density just increased by 28%. Overall, this research suggests that the TIPS method has great efficiency in reinforcing silica aerogels with less sacrifice of low density and large porosity.