Cargando…
Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core
BACKGROUND: Several interfacial surface treatments of zirconia surfaces have been proposed to improve adhesion to ceramic veneering. However, information regarding the durability and effect of such treatments on the bond strength following such treatments is lacking. AIM OF THE STUDY: This study aim...
Autores principales: | , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
BioMed Central
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10240723/ https://www.ncbi.nlm.nih.gov/pubmed/37277822 http://dx.doi.org/10.1186/s12903-023-03057-0 |
_version_ | 1785053834022748160 |
---|---|
author | Youssef, Marwa K. Abdelkader, Sanaa H. Aly, Yasser M. |
author_facet | Youssef, Marwa K. Abdelkader, Sanaa H. Aly, Yasser M. |
author_sort | Youssef, Marwa K. |
collection | PubMed |
description | BACKGROUND: Several interfacial surface treatments of zirconia surfaces have been proposed to improve adhesion to ceramic veneering. However, information regarding the durability and effect of such treatments on the bond strength following such treatments is lacking. AIM OF THE STUDY: This study aimed to evaluate the shear bond strength between veneering ceramic and zirconia core after different interfacial surface treatments. MATERIALS AND METHODS: Fifty-two discs (8 mm in diameter and 3 mm in height) were fabricated from zirconia blanks using a microtome cutting machine. Zirconia discs were divided into four groups (n = 13). Group I was subjected to air-borne abrasion using (Al(2)O(3)), group II was coated by bioglass, group III was coated with ZirLiner, and group IV was subjected to wash firing (sprinkle technique). A cylinder (4 mm in diameter and 3 mm in height) of veneering ceramic was fired on top of the zirconia core. Shear bond strength (SBS) between zirconia core and veneering ceramic was evaluated by using a universal testing machine. The data was collected and statistically analysed using One-Way ANOVA followed by multiple pairwise comparisons using Bonferroni adjusted significance level. The failure modes were assessed using a stereomicroscope for each group. RESULTS: The highest mean bond strength was recorded in group III (17.98 ± 2.51 MPa), followed by group II (15.10 ± 4.53 MPa), then group I 14.65 ± 2.97 MPa. The lowest mean bond strength was recorded in group IV (13.28 ± 3.55 MPa). CONCLUSIONS: Surface treatments had an effect on the zirconia-veneer shear bond strength. Liner coating revealed the highest shear bond strength values, significantly higher in comparison to wash firing (sprinkle technique) . |
format | Online Article Text |
id | pubmed-10240723 |
institution | National Center for Biotechnology Information |
language | English |
publishDate | 2023 |
publisher | BioMed Central |
record_format | MEDLINE/PubMed |
spelling | pubmed-102407232023-06-06 Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core Youssef, Marwa K. Abdelkader, Sanaa H. Aly, Yasser M. BMC Oral Health Research BACKGROUND: Several interfacial surface treatments of zirconia surfaces have been proposed to improve adhesion to ceramic veneering. However, information regarding the durability and effect of such treatments on the bond strength following such treatments is lacking. AIM OF THE STUDY: This study aimed to evaluate the shear bond strength between veneering ceramic and zirconia core after different interfacial surface treatments. MATERIALS AND METHODS: Fifty-two discs (8 mm in diameter and 3 mm in height) were fabricated from zirconia blanks using a microtome cutting machine. Zirconia discs were divided into four groups (n = 13). Group I was subjected to air-borne abrasion using (Al(2)O(3)), group II was coated by bioglass, group III was coated with ZirLiner, and group IV was subjected to wash firing (sprinkle technique). A cylinder (4 mm in diameter and 3 mm in height) of veneering ceramic was fired on top of the zirconia core. Shear bond strength (SBS) between zirconia core and veneering ceramic was evaluated by using a universal testing machine. The data was collected and statistically analysed using One-Way ANOVA followed by multiple pairwise comparisons using Bonferroni adjusted significance level. The failure modes were assessed using a stereomicroscope for each group. RESULTS: The highest mean bond strength was recorded in group III (17.98 ± 2.51 MPa), followed by group II (15.10 ± 4.53 MPa), then group I 14.65 ± 2.97 MPa. The lowest mean bond strength was recorded in group IV (13.28 ± 3.55 MPa). CONCLUSIONS: Surface treatments had an effect on the zirconia-veneer shear bond strength. Liner coating revealed the highest shear bond strength values, significantly higher in comparison to wash firing (sprinkle technique) . BioMed Central 2023-06-05 /pmc/articles/PMC10240723/ /pubmed/37277822 http://dx.doi.org/10.1186/s12903-023-03057-0 Text en © The Author(s) 2023 https://creativecommons.org/licenses/by/4.0/Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ (https://creativecommons.org/licenses/by/4.0/) . The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/ (https://creativecommons.org/publicdomain/zero/1.0/) ) applies to the data made available in this article, unless otherwise stated in a credit line to the data. |
spellingShingle | Research Youssef, Marwa K. Abdelkader, Sanaa H. Aly, Yasser M. Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title | Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title_full | Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title_fullStr | Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title_full_unstemmed | Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title_short | Effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
title_sort | effect of different interfacial surface treatments on the shear bond strength of veneering ceramic and zirconia core |
topic | Research |
url | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10240723/ https://www.ncbi.nlm.nih.gov/pubmed/37277822 http://dx.doi.org/10.1186/s12903-023-03057-0 |
work_keys_str_mv | AT youssefmarwak effectofdifferentinterfacialsurfacetreatmentsontheshearbondstrengthofveneeringceramicandzirconiacore AT abdelkadersanaah effectofdifferentinterfacialsurfacetreatmentsontheshearbondstrengthofveneeringceramicandzirconiacore AT alyyasserm effectofdifferentinterfacialsurfacetreatmentsontheshearbondstrengthofveneeringceramicandzirconiacore |