Interfacial Behavior and Dechlorination Reaction of Water Droplet Impact on a Heated Extracted Titanium Tailing Surface

[Image: see text] The interfacial behaviors of the droplet impact on a heated extracted titanium tailing surface are studied experimentally. The effects of surface temperatures and Weber numbers on the droplet spreading characteristics are examined. The factors affecting the mass fraction and dechlorination ratio of extracted titanium tailings under the action of interfacial behavior have been researched by thermogravimetric analysis. The compositions and microstructures of extracted titanium tailings are characterized using X-ray fluorescence spectroscopy and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS). The interfacial behaviors on the extracted titanium tailing surface are classified into four regimes, i.e., boiling-induced break-up, advancing recoiling, splash with a continuous liquid film, and splash with a broken film. The maximum spreading factors increase with the surface temperature and the Weber number. It is found that the surface temperature has a dominant influence on the spreading factors and interfacial effect, further affecting its chlorination reaction. SEM-EDS analysis revealed that the extracted titanium tailing particles are irregular shaped. There are some fine pores on the surface after the reaction. The main concentrations are Si, Al, and Ca oxides with a certain amount of C elements. The findings of this research provide a new pathway to utilize the extracted titanium tailings comprehensively.