Investigation on the Short-Term Aging Scheme for High Viscosity Modified Bitumen

Due to the highly viscous characteristics of high viscosity modified bitumen (HVMB), the commonly used short-term aging schemes are not suitable for it. As such, the objective of this study is to introduce a suitable short-term aging scheme for HVMB by increasing the aging period and temperature. For this purpose, two kinds of commercial HVMB were aged via rolling thin-film oven test (RTFOT) and thin-film oven test (TFOT) at different aging periods and temperatures. At the same time, open-graded friction course (OGFC) mixtures prepared using HVMB were also aged via two aging schemes to simulate the short-term aging of bitumen at the mixing plant. With the aid of temperature sweep, frequency sweep, and multiple stress creep recovery tests, the rheological properties of short-term aged bitumen and the extracted bitumen were tested. By comparing the rheological properties of TFOT- and RTFOT-aged bitumen with those of extracted bitumen, suitable laboratory short-term aging schemes for HVMB were determined. Comparative results showed that aging the OGFC mixture in a 175 °C forced-draft oven for 2 h is suitable to simulate the short-term aging process of bitumen at the mixing plant. Compared with RTOFT, TFOT was more preferable for HVMB. Additionally, the recommended aging period and temperature for TFOT was 5 h and 178 °C, respectively.