Study on Microwave-Assisted Ignition Using a Novel Aero-Engine Combustor

Microwave plasma can improve the performance of ignition and combustion, as well as reduce pollutant emissions. By designing a novel microwave feeding device, the combustor can be used as a cavity resonator to generate microwave plasma and improve the performance of ignition and combustion. In order to feed the energy of microwave into the combustor as much as possible, and effectively adapt to the change in resonance frequency of combustor during ignition and combustion, the combustor was designed and manufactured by optimizing the size of slot antenna and setting the tuning screws, according to the simulation results of HFSS software (version: 2019 R 3). The relationship between the size, position of metal tip in the combustor and the discharge voltage was studied using HFSS software, as well as the interaction between ignition kernel, flame and microwave. The resonant characteristics of combustor and the discharge of microwave-assisted igniter were subsequently studied via experiments. The results show that the combustor as microwave cavity resonator has a wider resonance curve and can adapt to the change in resonance frequency during ignition and combustion. It is also indicated that microwave can enhance the discharge development of igniter and increase the discharge size. Based on this, the electric and magnetic field effects of microwave are decoupled.