Apparent Permeability Model of Coalbed Methane in Moist Coal: Coupling Gas Adsorption and Moisture Adsorption

[Image: see text] Under specific conditions, moisture in natural coal seams can be adsorbed in the pores of the coal matrix, reducing the amount of methane adsorption sites and the effective area of the transport channels. This makes the prediction and evaluation of permeability in CBM exploitation more challenging. In this paper, we developed an apparent permeability model of coalbed methane coupling viscous flow, Knudsen diffusion, and surface diffusion which considers the effects of adsorbed gas and moisture in the pores of the coal matrix on the permeability evolution. The predicted data of the present model are compared with those of other models, and the results show good agreement, verifying the accuracy of the model. The model was employed to study the apparent permeability evolution characteristics of coalbed methane under different pressure and pore size distribution conditions. The main findings are as follows: (1) moisture content increases with saturation, with a slower increase for smaller porosities and an accelerated non-linear increase for porosities greater than 0.1. (2) Gas adsorption in pores decreases permeability, further weakened by moisture adsorption under high pressure but negligible at pressures below 1 MPa. (3) Higher water saturation weakens gas transport capacity, especially with pore sizes smaller than 10 nm. (4) The non-Darcy effect weakens with higher initial porosity, and neglecting moisture adsorption may significantly deviate from actual values in modeling methane transport in coal seams. The present permeability model can capture the transport characteristics of CBM in moist coal seams more realistically and is more applicable for predicting and evaluating the gas transport performance under dynamic variations of pressure, pore size, and moisture. The results in this paper can explain the transport behavior of gas in moist, tight, porous media and also provide a foundation for coalbed methane permeability evaluation.