Experimental testing of irradiated engine oil using an e-beam

Engine oil forms a complex system with a number of features. These features consist of hydrocarbons, various natural, or synthetic polymers. The irradiation of polymers becomes an integral part of modern industry. The lubrication, charge, thermal and cleaning requirements, which engine oils are expected to meet, are often chemically contradictory and manufacturers have to decide to compromise. Electron accelerators are widely used to enhance polymer properties. By applying radiation technology, it is possible to increase the desirable properties of polymers while leaving other properties at their original value. The paper focuses on combustion engine oil modified by e-beam. The assessed engine oil has a hydrocarbon base, which, from the chemical point of view, is processed as a polymer during the irradiation process. In this paper we have compared selected properties of the conventional and the irradiated engine oil during two exchange intervals. We have examined appropriate dose, dose rate, irradiation volume and a container on a single accelerated electrons energy. The examined oil properties were of a physical and physico-chemical nature, and included mainly kinematic viscosity, viscosity index, the total base number, soot content, oxidation, sulfation, significant chemical elements and wear particles. Every oil attribute is compared with its original value. The main objective of this paper is to demonstrate that the application of e-beam is an adequate method used to enhance engine oil properties to achieve cleaner engine running, and extend engine oil lifetime.