L-Poly(lactic acid) Production by Microwave Irradiation of Lactic Acid Obtained from Lignocellulosic Wastes

L-polylactic acid (PLA), a semi–crystalline aliphatic polyester, is one of the most manufactured biodegradable plastics worldwide. The objective of the study was to obtain L-polylactic acid (PLA) from lignocellulosic plum biomass. Initially, the biomass was processed via pressurized hot water pretreatment at a temperature of 180 °C for 30 min at 10 MPa for carbohydrate separation. Cellulase and the beta-glucosidase enzymes were then added, and the mixture was fermented with Lacticaseibacillus rhamnosus ATCC 7469. The resulting lactic acid was concentrated and purified after ammonium sulphate and n-butanol extraction. The productivity of L-lactic acid was 2.04 ± 0.18 g/L/h. Then, the PLA was synthesized in two stages. Firstly, lactic acid was subjected to azeotropic dehydration at 140 °C for 24 h in the presence of xylene, using SnCl(2) (0.4 wt.%) as a catalyst, resulting in lactide (CPLA). Secondly, microwave-assisted polymerization was carried out at 140 °C for 30 min with 0.4 wt.% SnCl(2). The resulting powder was purified with methanol to produce PLA with 92.1% yield. The obtained PLA was confirmed using electrospray ionization mass spectrometry, nuclear magnetic resonance, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. Overall, the resulting PLA can successfully replace the traditional synthetic polymers used in the packaging industry.