Study of Heat Treatment Effect on Mechanical Properties of Epoxy Resin Reinforced with Fiber Glass

In this paper, mechanical properties of the diglycidyl ether of bisphenol A epoxy resin (EP) reinforced with a 20% fiber glass (GF) with layered structure after high temperature aging are studied. Tensile and flexural stress–strain curves of the GF/EP composite after aging tests in the temperature range of 85–145 °C in air were measured. Tensile and flexural strength demonstrate gradual decrease with the increase in the aging temperature. The failure mechanism at the micro scale is studied by the scanning electron microscopy. A separation of the GFs and EP matrix and evident pullout of the GFs are observed. Degradation of the mechanical properties is explained by a cross-linking and chain scission of the initial molecular structure of the composite and decrease in the interfacial adhesion force between GFs and EP matrix caused by oxidation of the EP matrix and difference of the GF and EP coefficients of thermal expansion.