Polyethersulfone (PES) Filters Improve the Recovery of Legionella spp. and Enhance Selectivity against Interfering Microorganisms in Water Samples

In the analysis of water samples, the type of filtration membrane material can influence the recovery of Legionella species, although this issue has been poorly investigated. Filtration membranes (0.45 µm) from different materials and manufacturers (numbered as 1, 2, 3, 4, and 5) were compared: mixed cellulose esters (MCEs), nitrocellulose (NC), and polyethersulfone (PES). After membrane filtration of samples, filters were placed directly onto GVPC agar and incubated at 36 ± 2 °C. The highest mean counts of colony-forming units and colony sizes for Legionella pneumophila and Legionella anisa were obtained with PES filters (p < 0.001). All membranes placed on GVPC agar totally inhibited Escherichia coli and Enterococcus faecalis ATCC 19443 and ATCC 29212, whereas only the PES filter from manufacturer 3 (3-PES) totally inhibited Pseudomonas aeruginosa. PES membrane performance also differed according to the manufacturer, with 3-PES providing the best productivity and selectivity. In real water samples, 3-PES also produced a higher Legionella recovery and better inhibition of interfering microorganisms. These results support the use of PES membranes in methods where the filter is placed directly on the culture media and not only in procedures where membrane filtration is followed by a washing step (according to ISO 11731:2017).