The Blending Effect of Single-Shade Composite with Different Shades of Conventional Resin Composites—An In Vitro Study

Objectives Single-shade composite systems are gaining popularity among clinicians due to the claimed potential of blending with different tooth structure shades while restoring the tooth. The purpose of this study was to evaluate the blending effect of two single-shade composite with different shades of conventional resin composite systems. Materials and Methods Seventy-two composite cylinders of B1, B2, A1, A2, A3, or A3.5 shade from CharmFil Plus (CP) and Filtek Universal Restorative (3M) were prepared using custom-made silicone mold. Single-shade composite OMNICHROMA (OC) or Beautifil II Enamel (BE) was placed in the center of each cylinder and polymerized. The color parameters, lightness (L*), chroma (C*), and hue (H*) of each composite were measured using a color chronometer. Furthermore, color stability of the samples was evaluated after 1-week staining challenge. Statistical Analysis Multivariant analysis was performed to evaluate the effect of material and shade on the color parameters. Multiple comparisons of the data were performed using post hoc test. The staining challenge data were analyzed using repeated measure analysis of variance and paired sample T -test. Results The multivariant analysis showed a statistically significant difference in color parameters among CP, 3M, OC, and BE ( p = 0.001). Image analysis showed a visual blending effect for both OC and BE for certain shades; however, some color contrast with the darker shades was observed. The C* value of OC showed a similar pattern to CP; however, the H* of the latter was closely followed by BE. The L* value showed statistically significant difference among the shades of 3M, and in OC and BE when blended with 3M. Conclusion All four materials used in this study showed color alteration after the staining challenge. Single-shade composite can blend with only certain shades of resin composites.