The Effect of Modifying Canadian Goldenrod (Solidago canadensis) Biomass with Ammonia and Epichlorohydrin on the Sorption Efficiency of Anionic Dyes from Water Solutions

This study examined the effect of modifying Canadian goldenrod (Solidago canadensis) biomass on its sorption capacity of Reactive Black 5 (RB5) and Reactive Yellow 84 anionic dyes. The scope of the research included the characteristics of sorbents (FTIR, elementary analysis, pH(PZC)), the effect of pH on dye sorption efficiency, sorption kinetics, and the maximum sorption capacity (describing the data with Langmuir 1 and 2 and Freundlich models). FTIR analyses showed the appearance of amine functional groups in the materials modified with ammonia water, which is indicative of the sorbent amination process. The amination efficiency was higher in the case of materials pre-activated with epichlorohydrin, which was confirmed by elemental analysis and pH(PZC) values. The sorption efficiency of RB5 and RY84 on the tested sorbents was the highest in the pH range of 2–3. The sorption capacity of the goldenrod biomass pre-activated with epichlorohydrin and then aminated with ammonia water was 71.30 mg/g and 59.29 mg/g in the case of RB5 and RY84, respectively, and was higher by 2970% and 2510%, respectively, compared to the unmodified biomass. Amination of biomass pre-activated with epichlorohydrin can increase its sorption capacity, even by several dozen times.