Effects of chemical additive and packing density on the fermentation profile and nutrient composition of ensiled cocktail forage mix

Recently, the use of cocktail forage mixes in dairy cattle rations has become more common because the mixtures are low-cost, fit well in rotation after a cereal grain forage, and can have similar yield and energy value compared with alfalfa silage. This experiment evaluated the effects of a chemical additive and packing density on the fermentation profile and nutrient composition of cocktail mix silage. The cocktail forage mix (brown-midrib sorghum-sudangrass, Italian ryegrass, red clover, berseem clover, and hairy vetch) was harvested, ensiled in laboratory silos (3.79-L plastic buckets), and allowed to ferment for 30 d. The experiment consisted of 6 treatments, 2 chemical additives [CON (30 mL of distilled water) or ADD (sodium sulfite, sodium metabisulfite, and fungal amylase)], and 3 packing densities [D100, D75, and D50 (100%, 75%, or 50% of the maximum material in laboratory silos, respectively)], for a total of 24 silos (4 replications per treatment combination). No interactions of additive by density were detected for any parameters evaluated. The addition of the chemical additive influenced fermentation profile, with reduced concentrations of total acids, lactic acid, acetic acid, and ethanol in ADD-treated silages. Moreover, D50 reduced concentrations of total acids, lactic acid, and acetic acid compared with D100, but had greater pH and yeast and mold counts. Minimal changes in nutrient composition were detected regardless of treatment. Overall, this study corroborates the importance of a well-packed silage during the ensiling process. Poorly packed cocktail mix silages may be more prone to spoilage based on yeast and mold counts.