A New Mechanical Mouth Opener for Dynamic Magnetic Resonance Imaging of the Temporomandibular Joint

(1) Background: During the magnetic resonance imaging (MRI) of the temporomandibular joint (TMJ), it is necessary to scan the joints in the closed- and open-jaw position, as well as in the maximally open-jaw position. In order to examine both joints in these positions, an MRI compatible mouth opener is required, which allows the articular surfaces to maintain their position stably. (2) Methods: In this study, we included 200 patients aged 18 to 65, with various levels of clinical severity. The mouth opener is made of polymethyl methacrylate and used for dynamic imaging of TMJ. It is in the form of an arrow, with incisures on upper and lower surfaces 1 mm apart and these match possible variations in jaw opening. All the patients were scanned with mouth opener and, immediately after this scanning, with syringe (20 ccm) as a standard device used for mouth opening in clinical setting. (3) Results: A total of 200 MR examinations of TMJs were performed and the mechanical mouth opener was successfully applied without artifacts in all patients. The mouth opener device proved to be adequate in case of MRI of the TMJ for different ranges of mouth opening with the proper protocol for provoked imaging, because the incisures are located at a distance of 1 mm and no objective artifacts were observed in any examination that degraded the diagnostic quality of the examination. (4) Conclusions: The design of the acrylate mouth opener is precisely defined, and it has a purpose in the MRI diagnosis of TMJ disorders.