Developing a Simple, Effective, and Quick Process to Make Silver Nanowires with a High Aspect Ratio

A growing number of people are interested in using silver nanowires (AgNWs) as potential transparent and conductive materials. The production of high-performance and high-throughput AgNWs was successfully optimized in this work using a one-step, straightforward, and reproducible modified polyol approach. The factors influencing the morphology of the silver nanowires have undergone extensive research in order to determine the best-optimized approach for producing AgNWs. The best AgNW morphology, with a length of more than 50 m and a diameter of less than 35 nm (aspect ratio is higher than 1700), was discovered to be produced by a mixture of 44 mM AgNO(3), 134 mM polyvinylpyrrolidone (PVP) (Mo.Wt 40,000), and 2.4 mM KCl at 160 °C with a stirring rate of 100 rpm. With our improved approach, the overall reaction time was cut from almost an hour with the conventional polyol method to a few minutes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet (UV) spectroscopy were used to characterize AgNWs. The resultant AgNWs’ dispersion was cleaned using a centrifuge multiple times before being deposited on glass and PET substrates at room temperature. In comparison to commercial, delicate, and pricey indium-doped tin oxide (ITO) substrates, the coated samples displayed exceptionally good sheet resistance of 17.05/sq and optical haze lower than 2.5%. Conclusions: Using a simple one-step modified polyol approach, we were able to produce reproducible thin sheets of AgNWs that made excellent, flexible transparent electrodes.