Effect of Two Different Ageing Exposures on the Colour Stability of Transparent Polyurethane Finishing

This paper deals with the influence of dark and light exposure on the colour change of a transparent two-component polyurethane surface finish. The surface finish with polyacrylic and aldehyde resin was applied to the surfaces of untreated and hydrothermally treated European beech, alder, Norway maple, and Paper birch wood. The test specimens were deposited indoors for 60 days. The colour values (lightness L*, redness + a*, yellowness + b*, chroma C*, hue angle h°) were expressed in the CIELAB system. The results showed that the colour difference of the finish surfaces of all hydrothermally treated wood species was 27–50% lower after the dark than when exposed to light. In the case of finished untreated wood, the colour difference was 51–73% lower after the dark than light exposure. Only the finished untreated and hydrothermally treated Norway maple wood surfaces showed similar and significant changes after both dark and light exposure. The lower value of the colour difference of the finished hydrothermally treated wood was due to the fact that steaming wood with saturated water steam has a positive effect on the overall colour stability of the finish and partial resistance to the initiation of photolytic reactions caused by light.