The reverse coracoacromial ligament transfer for “horizontal” acromioclavicular joint instability

BACKGROUND: Acromioclavicular (AC) horizontal instability is a problem affecting not only young athletic patients after a trauma to the AC joint but also older patients who have undergone distal clavicle resection. It may cause pain and poor functional outcomes unless the reconstruction technique specifically addresses the horizontal instability of the clavicle, in addition to the well-known superior instability. METHODS: Three cadaveric specimens underwent dissection of the AC joint capsule to determine the superior attachments of the AC joint capsule. These shoulders subsequently underwent distal clavicle resection and were loaded to a 7-kg weight in the horizontal plane. The horizontal displacement of the clavicle was measured and resection continued to the point of horizontal instability of the clavicle. Thereafter, the reverse coracoacromial ligament reconstruction technique was performed and recreation of horizontal stability assessed. Utilization of the reverse coracoacromial ligament transfer in two clinical cases will also be presented. RESULTS: The AC joint capsule is continuous with trapezius and deltoid insertions. The average distance between the articular surface and insertion of the capsule on the clavicle is 10 mm and on the acromion is 14.8 mm. Horizontal clavicular translation increased from 2.3 mm when intact to 3.3 mm with capsular transection, 8.7 mm with 5 mm clavicle resection, and finally 15 mm with a 10-mm clavicle resection. Horizontal instability of the clavicle was demonstrated with a 10-mm clavicle resection. CONCLUSION: Horizontal instability of the clavicle is evident with distal clavicle resection of greater than 10 mm. A reverse coracoacromial ligament transfer may be a reasonable technique to address horizontal stability of the clavicle during AC joint reconstruction in the context of painful instability.