Bio-oil production from biogenic wastes, the hydrothermal conversion step

Background: Food wastes are an abundant resource that can be effectively valorised by hydrothermal liquefaction to produce bio-fuels. The objective of the European project WASTE2ROAD is to demonstrate the complete value chain from waste collection to engine tests. The principle of hydrothermal liquefaction is well known but there are still many factors that make the science very empirical. Most experiments in the literature are performed on batch reactors. Comparison of results from batch reactors with experiments with continuous reactors are rare in the literature. Methods: Various food wastes were transformed by hydrothermal liquefaction. The resources used and the products from the experiments have been extensively analysed. Two different experimental reactors have been used, a batch reactor and a continuous reactor. This paper presents a dataset of fully documented experiments performed in this project, on food wastes with different compositions, conditions and solvents. The data set is extended with data from the literature. The data was analysed using machine learning analysis and regression techniques. Results: This paper presents experimental results on various food wastes as well as modelling and analysis with machine learning algorithms. The experimental results were used to attempt to establish a link between batch and continuous experiments. The molecular weight of bio-oil from continuous experiments appear higher than that of batch experiments. This may be due to the configuration of our reactor. Conclusions: This paper shows how the use of regression models help with understanding the results, and the importance of process variables and resource composition. A novel data analysis technique gives an insight on the accuracy that can be obtained from these models.