Cargando…
A High-Power 170 GHz in-Phase Power-Combing Frequency Doubler Based on Schottky Diodes
In this paper, a high-power 170 GHz frequency doubler based on a Schottky diode is proposed using an in-phase power-combining structure. Unlike a conventional power-combining frequency doubler, the proposed frequency doubler utilizes the combination of a T-junction power divider and two bend wavegui...
Autores principales: | , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10456399/ https://www.ncbi.nlm.nih.gov/pubmed/37630066 http://dx.doi.org/10.3390/mi14081530 |
Sumario: | In this paper, a high-power 170 GHz frequency doubler based on a Schottky diode is proposed using an in-phase power-combining structure. Unlike a conventional power-combining frequency doubler, the proposed frequency doubler utilizes the combination of a T-junction power divider and two bend waveguides to eliminate the phase difference between the two output ports of the T-junction power divider, so as to achieve in-phase power combining with a concise structure. The frequency doubler was fabricated on a 50 μm thick AlN high-thermal-conductivity substrate to reduce the impact of the thermal effect on the performance. The measured results show that the doubler exhibits a conversion efficiency of 11–31.3% in the 165–180 GHz band under 350–400 mW of input power, and a 118 mW peak output power with a 31.3% efficiency was measured at 174 GHz `when the input power was 376 mW. A good agreement was achieved between the simulation results and the measured performance of the doubler, which proves the effectiveness of the proposed in-phase power-combining structure. |
---|