A Performance Improvement for Indoor Positioning Systems Using Earth’s Magnetic Field

Although most indoor positioning systems use radio waves, such as Wi-Fi, Bluetooth, or RFID, for application in department stores, exhibition halls, stations, and airports, the accuracy of such technology is easily affected by human shadowing and multipath propagation delay. This study combines the earth’s magnetic field strength and Wi-Fi signals to obtain the indoor positioning information with high availability. Wi-Fi signals are first used to identify the user’s area under several kinds of environment partitioning methods. Then, the signal pattern comparison is used for positioning calculations using the strength change in the earth’s magnetic field among the east–west, north–south, and vertical directions at indoor area. Finally, the k-nearest neighbors (KNN) method and fingerprinting algorithm are used to calculate the fine-grained indoor positioning information. The experiment results show that the average positioning error is 0.57 m in 12-area partitioning, which is almost a 90% improvement in relation to that of one area partitioning. This study also considers the positioning error if the device is held at different angles by hand. A rotation matrix is used to convert the magnetic sensor coordinates from a mobile phone related coordinates into the geographic coordinates. The average positioning error is decreased by 68%, compared to the original coordinates in 12-area partitioning with a 30-degree pitch. In the offline procedure, only the northern direction data are used, which is reduced by 75%, to give an average positioning error of 1.38 m. If the number of reference points is collected every 2 m for reducing 50% of the database requirement, the average positioning error is 1.77 m.