Cargando…
Modern PID/FOPID controllers for frequency regulation of interconnected power system by considering different cost functions
This article presents frequency regulation of an interconnected three-area power system (Thermal + Wind + Hydro). Fractional Order PID (FOPID) and Proportional-Integral-Derivative (PID) controllers are applied as subsidiary regulators to control the electrical power interconnected system at the time...
Autores principales: | , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
Nature Publishing Group UK
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10462752/ https://www.ncbi.nlm.nih.gov/pubmed/37640919 http://dx.doi.org/10.1038/s41598-023-41024-5 |
Sumario: | This article presents frequency regulation of an interconnected three-area power system (Thermal + Wind + Hydro). Fractional Order PID (FOPID) and Proportional-Integral-Derivative (PID) controllers are applied as subsidiary regulators to control the electrical power interconnected system at the time of sudden load variation. To accomplish this study, Genetic Algorithm (GA), Grey Wolf Optimizer (GWO), Sine Cosine Inspired Algorithm (SCIA) and Atom Search Inspired Algorithm (ASIA) are implemented to optimize the secondary regulators' gains (PID and FOPID) by considering various cost functions such as Integral Absolute Error (IAE), Integral Time Absolute Error (ITAE), Integral Square Error (ISE), and Integral Time Square Error (ITSE). Performance analysis in this work is conducted using various cost functions based on GA, GWO, SCIA and ASIA. The comparative analysis of the attained results reveals that GWO-PID and ASIA–PID settle at (83.83 s) and (30.31 s), respectively and ASIA-FOPID at (25.12 s). The controllers based on ITSE as a cost function outperform the comptrollers with other cost functions (ISE, IAE and ITAE). In addition, the ISE-based GA–PID and SCIA–PID settle at (113.92 s) and (35.1 s), respectively and SCIA-FOPID at (24.78 s). The ISE-based regulators yield improved response equated to other cost functions (ITSE, IAE and ITAE) optimized controllers. The robustness test also is carried out to validate the effectiveness of the proposed optimization techniques by changing the system parameters within ± 25% and ± 50% from their nominal values as well as changing the load pattern. |
---|