Numerical Simulation and Comparison of the Mechanical Behavior of Toughened Epoxy Resin by Different Nanoparticles

[Image: see text] Adding nanoparticles as the second phase to epoxy can achieve a good toughening effect. The aim of this paper is to simulate the toughening behavior of epoxy resin by different nanoparticles using a convenient and effective finite element method. The mechanical behaviors of epoxy resins toughened by nano core–shell polymers, liquid rubber, and nanosilica were compared by numerical simulations using the representative volume element (RVE). It is indicated that the addition of a nano core–shell polymer and liquid rubber can reduce the tensile properties of epoxy resin, while nanosilica is on the contrary. With the increase of nanoparticle content, the length of crack propagation decreases, and the toughening effect of the nano core–shell polymer is the best. The failure mode is determined by the particle/matrix interface when the modulus of the nanoparticle is much larger than that of epoxy resin. However, it is determined by the interface properties of the particle/matrix and the modulus of nanoparticles in other cases. The results provide a theoretical basis for toughening nanoparticle selection of nanoparticle-toughened epoxy resin and other similar simulations in the future.