Comparison of sampling methods for the determination of volatile organic compounds in consumer aerosol sprays

Many studies have evaluated the hazardous substances contained in various household chemical products. However, for aerosol spray products there is currently no international standard sampling method for use in a component analysis. The aim of this study was to develop an appropriate sampling method for the analysis of volatile organic compounds (VOCs) in consumer aerosol sprays. Two different sampling methods, spraying (into a vial) and perforating (and transferring the contents into a vial), were used to evaluate the levels of 16 VOC components in eight different aerosol spray products. All eight products contained trace amounts of hazardous VOCs, and a quantitative analysis showed that, for the same product, VOC concentrations were higher when spraying than when perforating. Using the spraying method, average toluene, ethylbenzene, p-xylene, o-xylene, and styrene concentrations were 1.80-, 2.10- 2.25-, 2.03-fold, and 1.28-fold higher, respectively, than when using the perforating method. The spraying method may provide more realistic estimates of the user's exposure to harmful substances and the associated health risks when using spray products. Of the two representative methods widely used to analyze harmful substances in consumer aerosol sprays, the spraying method is recommended over the perforating method for the analysis of VOCs.