Comparing Postoperative Taping vs Customized 3D Splints for Managing Nasal Edema after Rhinoplasty

BACKGROUND: Significant swelling after rhinoplasty can temporarily obscure results and lead to distress for patients and surgeons. We recently developed three dimensional (3D)-printed nasal splints that aim to protect the nose and limit edema by applying gentle compression. This prospective, randomized study compares postoperative nasal edema in patients being treated with traditional taping versus 3D-printed splints. METHODS: Patients undergoing primary rhinoplasty (2019–2020) were randomized into two groups: taping versus 3D-printed splinting. For 12 weeks, patients either applied steri-strips to the dorsum and tip, or used 3D-printed splints, which were based on nasal simulations. The percentage change in volume (cm(3)) was calculated for the total nose, dorsum, and nasal tip at various time points. RESULTS: Nasal taping (n = 34) demonstrated a volume reduction of 4.8%, 9.9%, 10.0%, 10.3%, and 10.6% (compared with baseline) at 2 weeks, 6 weeks, 3 months, 6 months, and 1 year, respectively. In contrast, the resolution of swelling with 3D splints (n = 36) was 5.0%, 8.6%, 11.0%, 14.9%, and 15.1% at the same time points. Inter-group comparison showed that 3D splints led to significantly less edema of the total nose at 6 months and 1 year (P ≤ 0.05), as well as consistent reductions in the tip and dorsum, specifically (1 year, P ≤ 0.1, 0.01, respectively). CONCLUSIONS: 3D-printed splints after rhinoplasty leads to a significant reduction of edema, most noticeable at 6 months and 1 year. This study suggests that customized 3D-printed splints offer an effective clinical alternative to traditional taping to reduce postoperative edema after rhinoplasty.