High-Modulus Laminated SiC/AZ91 Material with Adjustable Microstructure and Mechanical Properties Based on the Adjustment of the Densities of the Ceramic Layers

To address the issue of inadequate strength and plasticity in magnesium matrix composites, SiC preforms were prepared using the freeze-casting process. The effects of sintering temperature on the microstructure, mechanical properties, and fracture behavior of SiCp/AZ91 magnesium matrix composites were studied by controlling the density of SiC preforms through low-temperature sintering. The results indicate that as the sintering temperature decreases, the reaction products in the SiC layer decrease, resulting in lower SiC preform density and increased content of AZ91 alloy filling in the layer. The increased alloy content in the ceramic layer not only inhibits crack initiation but also hinders crack propagation, thereby endowing the SiCp/AZ91 laminated material with excellent compressive strength and compressive strain. At the sintering temperature of 900 °C, the SiCp/AZ91 laminated material exhibits impressive compressive strength and strain values of 623 MPa and 8.77%, respectively, which demonstrates an excellent combination of strength and toughness.