Impact of Inclination of Girders and Columns on the Effort and Stability of Flat Bar Frames

The article describes a specific method of using innovative transverse systems of flat bar frames as structures forcing elastic shape transformations of nominally flat folded sheets into the forms of ruled shell roof coverings. An innovative method for parametric shaping these forms and arrangement of frames constituting structural systems of sheds with folded thin-walled roof coverings, taking account of the specificity of designing elastically transformed roof sheeting, was proposed. The proposed method for defining the loads of the considered frames supporting lower shelves of the folds of transformed roof sheeting, as loads distributed uniformly along the length of the upper chord of a roof frame girder, is also an innovative approach. The above unconventional premises result in the innovative topic of the research presented in terms of checking the impact of changing the shape of subsequent flat frames (intended for the construction of sheds roofed with the transformed sheeting) on the geometric and mechanical properties of the members of these frames. For the defined loads and the proposed parameterization of the frame forms, an innovative set of conditions was developed to optimize their performance, and then a theoretical analysis of the observed dependencies was carried out. This analysis was performed in an unconventional, novel way using section modules of the cross-sections of all members. The performed computer simulations confirmed the significance of changes in the inclination of girders and columns on the geometric and mechanical properties of the members. The obtained results are the basis and justification for simulations and tests in the scope of further modification of the form, loads, work, and methods of using various configurations of flat frames in constructions.