Fabrication of Superhydrophobic Porous Brass by Chemical Dealloying for Efficient Emulsion Separation

By taking advantage of typical dealloying and subsequent aging methods, a novel homogeneous porous brass with a micro/nano hierarchical structure was prepared without any chemical modification. The treatment of commercial brass with hot concentrated HCl solution caused preferential etching of Zn from Cu(62)Zn(38) alloy foil, leaving a microporous skeleton with an average tortuous channel size of 1.6 μm for liquid transfer. After storage in the atmosphere for 7 days, the wettability of the dealloyed brass changed from superhydrophilic to superhydrophobic with a contact angle > 156° and sliding angle < 7°. The aging treatment enhanced the hydrophobicity of the brass by the formation of Cu(2)O on the surface. By virtue of the opposite wettability to water and oil, the aged brass separated surfactant-stabilized water-in-oil emulsions with separation efficiency of over 99.4% and permeate flux of about 851 L·m(−2)·h(−1) even after recycling for 60 times. After 10 times of tape peeling or sandpaper abrasion, the aged brass maintained its superhydrophobicity, indicating its excellent mechanical stability. Moreover, the aged brass still retained its superhydrophobicity after exposure to high temperatures or corrosive solutions, displaying high resistance to extreme environments. The reason may be that the bicontinuous porous structure throughout the whole foil endows stable mechanical properties to tolerate extreme environments. This method should have a promising future in expanding the applications of alloys.