Geotechnical Deformation Distributed Measuring Technology Research Based on Parallel Spiral Sensing Line

The precursors that appear when geological disasters occur are geotechnical deformations. This paper studies the TDR (Time Domain Reflection) measurement technology for the distributed measurement of geotechnical deformation using parallel spiral wire as a sensor, which is used for monitoring and early warning detection of geological disasters. Based on the mechanism of the electromagnetic field distribution parameters of the parallel spiral sensing wire, the relationship between the stretching amount of the parallel spiral wire and the change in its characteristic impedance is analyzed. When the parallel spiral wire is buried in the soil, the geotechnical deformation causes the parallel spiral wire to be stretched, and according to its characteristic impedance change, the stretching position and the stretching degree can be obtained, thus realizing the distributed measurement of geotechnical deformation. Based on this principle, the TDR measurement system is developed, and a local single-point stretching amount and stretching positioning experiment are designed for the parallel spiral sensing line to verify the effectiveness of the sensing technology and the usability of the measurement system.