Cargando…

A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors

In this study, we analyzed the morphological changes and molecular structure changes on the surface of single-walled carbon nanotube (SWCNT) films during oxygen plasma (O(2)) etching of SWCNT surfaces formed by the spray method and analyzed their potential use as electrochemical electrodes. For this...

Descripción completa

Detalles Bibliográficos
Autores principales: Kim, Jinkyeong, Han, Ji-Hoon, Kim, Joon Hyub
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2023
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10537897/
https://www.ncbi.nlm.nih.gov/pubmed/37765869
http://dx.doi.org/10.3390/s23187812
_version_ 1785113202154012672
author Kim, Jinkyeong
Han, Ji-Hoon
Kim, Joon Hyub
author_facet Kim, Jinkyeong
Han, Ji-Hoon
Kim, Joon Hyub
author_sort Kim, Jinkyeong
collection PubMed
description In this study, we analyzed the morphological changes and molecular structure changes on the surface of single-walled carbon nanotube (SWCNT) films during oxygen plasma (O(2)) etching of SWCNT surfaces formed by the spray method and analyzed their potential use as electrochemical electrodes. For this purpose, a SWCNT film was formed on the surface of a glass substrate using a self-made spray device using SWCNT powder prepared with DCB as a solvent, and SEM, AFM, and XPS analyses were performed as the SWCNT film was O(2) plasma etched. SEM images and AFM measurements showed that the SWCNT film started etching after about 30 s under 50 W of O(2) plasma irradiation and was completely etched after about 300 s. XPS analysis showed that as the O(2) plasma etching of the SWCNT film progressed, the sp(2) bonds representing the basic components of graphite decreased, the sp3 bonds representing defects increased, and the C–O, C=O, and COO peaks increased simultaneously. This result indicates that the SWCNT film was etched by the O(2) plasma along with the oxygen species. In addition, electrochemical methods were used to verify the damage potential of the remaining SWCNTs after O(2) plasma etching, including cyclic voltammetry, Randles plots, and EIS measurements. This resulted in a reversible response based on perfect diffusion control in the cyclic voltammetry, and an ideal linear curve in the Randles plot of the peak current versus square root scan rate curve. EIS measurements also confirmed that the charge transfer resistance of the remaining SWCNTs after O(2) plasma etching is almost the same as before etching. These results indicate that the remaining SWCNTs after O(2) plasma etching do not lose their unique electrochemical properties and can be utilized as electrodes for biosensors and electrochemical sensors. Our experimental results also indicate that the ionic conductivity enhancement by O(2) plasma can be achieved additionally.
format Online
Article
Text
id pubmed-10537897
institution National Center for Biotechnology Information
language English
publishDate 2023
publisher MDPI
record_format MEDLINE/PubMed
spelling pubmed-105378972023-09-29 A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors Kim, Jinkyeong Han, Ji-Hoon Kim, Joon Hyub Sensors (Basel) Article In this study, we analyzed the morphological changes and molecular structure changes on the surface of single-walled carbon nanotube (SWCNT) films during oxygen plasma (O(2)) etching of SWCNT surfaces formed by the spray method and analyzed their potential use as electrochemical electrodes. For this purpose, a SWCNT film was formed on the surface of a glass substrate using a self-made spray device using SWCNT powder prepared with DCB as a solvent, and SEM, AFM, and XPS analyses were performed as the SWCNT film was O(2) plasma etched. SEM images and AFM measurements showed that the SWCNT film started etching after about 30 s under 50 W of O(2) plasma irradiation and was completely etched after about 300 s. XPS analysis showed that as the O(2) plasma etching of the SWCNT film progressed, the sp(2) bonds representing the basic components of graphite decreased, the sp3 bonds representing defects increased, and the C–O, C=O, and COO peaks increased simultaneously. This result indicates that the SWCNT film was etched by the O(2) plasma along with the oxygen species. In addition, electrochemical methods were used to verify the damage potential of the remaining SWCNTs after O(2) plasma etching, including cyclic voltammetry, Randles plots, and EIS measurements. This resulted in a reversible response based on perfect diffusion control in the cyclic voltammetry, and an ideal linear curve in the Randles plot of the peak current versus square root scan rate curve. EIS measurements also confirmed that the charge transfer resistance of the remaining SWCNTs after O(2) plasma etching is almost the same as before etching. These results indicate that the remaining SWCNTs after O(2) plasma etching do not lose their unique electrochemical properties and can be utilized as electrodes for biosensors and electrochemical sensors. Our experimental results also indicate that the ionic conductivity enhancement by O(2) plasma can be achieved additionally. MDPI 2023-09-11 /pmc/articles/PMC10537897/ /pubmed/37765869 http://dx.doi.org/10.3390/s23187812 Text en © 2023 by the authors. https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
spellingShingle Article
Kim, Jinkyeong
Han, Ji-Hoon
Kim, Joon Hyub
A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title_full A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title_fullStr A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title_full_unstemmed A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title_short A Study on the O(2) Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors
title_sort study on the o(2) plasma etching method of spray-formed swcnt films and their utilization as electrodes for electrochemical sensors
topic Article
url https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10537897/
https://www.ncbi.nlm.nih.gov/pubmed/37765869
http://dx.doi.org/10.3390/s23187812
work_keys_str_mv AT kimjinkyeong astudyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors
AT hanjihoon astudyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors
AT kimjoonhyub astudyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors
AT kimjinkyeong studyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors
AT hanjihoon studyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors
AT kimjoonhyub studyontheo2plasmaetchingmethodofsprayformedswcntfilmsandtheirutilizationaselectrodesforelectrochemicalsensors