Machine Learning Solution for Predicting Vibrations while Drilling the Curve Section

[Image: see text] The downhole vibration is one of the most crucial factors that affect downhole equipment performance and failure, besides wellbore instability. Downhole tool failure, hole problems, mechanical energy loss, and ineffective drilling performance are commonly associated with drillstring high vibration levels. The high vibration level will lead to more complications while drilling that might cause nonproductive time and extra cost. Meanwhile, the downhole sensors for detecting the drillstring vibrations add more cost to the operation. Consequently, the new solutions based on technology capabilities provide a powerful tool to integrate and interpret the drilling data for the best use of @@the data for operation performance enhancement. This study provides a successful application for utilizing the surface drilling data to automate drillstring vibration detection during the drilling curve section employing machine learning (ML) techniques. The axial, torsional, and lateral vibration modes are detected through testing four ML techniques named the @@adaptive neuro-fuzzy inference system (ANFIS), radial basis function (RBF), functional networks (FN), and support vector machines (SVMs) with real field data. The models’ development was achieved by comprehensive study starting from data gathering, wrangling, statistical analysis, developing the ML models, evaluating the model prediction accuracy, and reporting the high accuracy results. The developed models were evaluated, and results showed that ANFIS and SVM models provided the highest accuracy with a coefficient of correlation (R) ranging from 0.9 to 0.99 followed by the RBF and FN models through model training and testing (R ranging from 0.82 to 0.96). Validating the models over unseen data confirmed the high accuracy prediction for the three vibration modes. Generally, the developed models provided technically accepted accuracy with R higher than 0.93 and AAPE less than 2.8% for SVM and ANFIS models while FN and RBF showed R between 0.82 and 0.95 and AAPE less than 5.7% between actual readings and predictions. Based on these results, the developed ML algorithm might be utilized as an intelligent solution to autodetect downhole vibration while drilling from surface sensor data only, which will save the downhole tool cost.