Generation of traffic input for flexible pavement design

Layered elastic theory (LET) was performed by Burmister. It helped to build mechanistic – empirical (M-E) pavement design. In this study, three different approaches were used to predict Cumulative Equivalent single axle load (C-ESAL) over the design period. Two were based on M-E and one was empirical. In each of these cases, standard axle loads were used as well as weight limits and vehicle classification, according to their axle configurations (single, tandem, tridem). Traffic data came from annual traffic census campaigns over the past ten years. Gross vehicle weight (GVW) and axle weight (AW) data came from a fixed weighing station performed during 31 days in 2020. Two road axis were considered: One having a weighing station (reference road) and one under technical studies (specific road). Traffic road data were used to perform regression analyses and predictions. AW and GVW helped to calculate Axle load equivalency factors (ALEF) and Truck equivalency factors (TEF) on the reference road. These values were projected on the specific road. Frequency distribution, gross vehicle weight distribution, axle load distribution of heavy vehicles are applied on the reference road. We performed overload AW and overload GVW analyses. Comparisons were done for the three approaches and an evaluation of technical studies was proposed, including traffic and AW monitoring and management systems. This work came as a basis for the transposition of M-E calculation of traffic inputs, more accurate and used over the passed fifty years, in Higher Income countries, called AASHTO method for USA, LCPC-SETRA method for France, to Cameroon and Sub-sahara African countries, that have been using empirical generation of traffic inputs over the same period, called CEBTP method.