Performance enhancement of up-flow anaerobic sludge blanket reactor for psychrophilic temperature during the dry season: Kality wastewater treatment plant

The main purpose of wastewater treatment plant (WWTP) is to reduce organic and inorganic pollutants to meet standards. But WWTPs employing up flow anaerobic sludge blanket (UASB) reactors under psychrophilic temperature are currently removing about 55% chemical oxygen demand (COD) and 70% total dissolved solids (TSS). The research was done to increase the treatment efficiencies of UASB reactor working under psychrophilic conditions through optimization of operational parameters like temperature, organic loading rate (OLR), pH and hydraulic retention time (HRT). Experimentation was carried out in a 0.0486 m(3) square-shaped pilot-scale UASB reactor. Experimental design response surface method (RSM) for performance enhancement and optimization of UASB reactor operational parameters through five levels of central composite design (CCD) was used. The optimized operational parameters obtained from CCD-RSM were as follows: temperature of 21.58 °C, OLR of 2.99 kg COD/m(3).d, HRT of 4.37hrs and pH of 6.3. Using optimized parameters, tests yielded efficiencies of 92.70%, 99.06%, and 94.50% for COD, TSS, and volatile suspended solid (VSS) respectively. The outlet concentrations of alkalinity, and volatile fatty acids (VFA), were found to be lower than the inlet concentrations. The alkalinity in the system accepts the hydrogen ion released by acids and the system is taken over by methanogensis to maintain the pH. The outlet concentration of sulfate ion was found to be increasing due to inhabitation of sulfur-reducing bacteria by an anaerobic condition of VFA and alkalinity at a pH less than 7.8.This process favors the production of CH(4) than H(2)S gas. In general, there was a high likelihood of improving the performance of UASB reactor operating at psychrophilic temperature by optimizing operational parameters.