Polyethylene glycol-grafted graphene oxide nanosheets in tailoring the structure and reverse osmosis performance of thin film composite membrane

Introducing hydrophilic polymers such as polyethylene glycol (PEG) within the polyamide (PA) layer of thin film composite (TFC) membranes helps achieve high water desalination performance. Here, PEGs of different molecular weights (X: 1500, 6000, 16,000 g/mol) are effectively introduced into the PA layer of TFC membranes utilizing PEG-grafted graphene oxide (GOP(X)) nanosheets and their effects on the physicochemical properties and reverse osmosis (RO) performance of the thin film nanocomposite (TFN) membranes are investigated. Among the TFNs prepared the GOP(16000)/TFN exhibits the best performance with 68% improvement in water flux and almost constant salt rejection compared to those of the bare TFC. The influence of PEG molecular weight on the RO performance of the membranes is interpreted by different surface and bulk hydrophilicity as well as thickness and surface roughness of PA layers of GOP(X)/TFNs. Furthermore, TFNs with thinner and smoother PA layers and thus higher water flux are obtained by dispersing GOP(X)s in the aqueous phase of the PA interfacial polymerization reaction than by dispersing them in the organic phase of the reaction. Finally, the high antifouling potential of TFNs containing PEG-grafted GOs is demonstrated.