The difference distance between the apical foramen and the anatomical apex in primary teeth—An in vitro study

INTRODUCTION: The apex area in the primary teeth changes continuously due to the physiologic resorption, therefore; the apical foramen (AF) may not correspond to the anatomic apex (AA), which gives a big challenge to achieve successful endodontic treatment. The aim of this research was to study the difference distance (DD) between the position of the AA and AF, besides the difference acceptance (DA) in primary teeth, and the effect of the following variables: root canal curvature, resorption degree, and canal size on DD and DA separately. METHODS: In this research, 180 root canals from 60 primary teeth were studied. Two lengths of each canal were measured by a K‐file from a certain point in the crown; the first length was until the AA and the second was until the AF. Then DD was obtained by calculating the difference between those two lengths. Statistical analysis tests were done. A p value of <.05 was considered significant at a 95% confidence level. RESULTS: The percentage of canals with 0 mm DD was 34.4%, while it was 1.1% with DD of 6 mm. The percentages of acceptable ( ≤ 2 mm) and unacceptable ( > 2 mm) difference were 84.4% and 15.6%, respectively. There was a significant difference in the DD value between the three groups of curvature degree and the three groups of canal size. There was a significant difference between the DA in the three groups of canal size. CONCLUSION: DD has a wide variation value in primary teeth regardless of the degree of root resorption, which has not affected this value or the accepted difference; however, DD and acceptable difference values are somehow affected by the degree of root curvature and canal size. We recommend adding acceptable difference as a criterion when considering pulpectomy treatment in primary teeth.