Removal of Cr(6+) ions and mordant violet 40 dye from liquid media using Pterocladia capillacea red algae derived activated carbon-iron oxides

In recent years, water pollution has become one of the most dangerous problems facing the world. Pollution of water with heavy metals and different dyes has caused many harmful effects on human health, living organisms and our environment. In this study, iron oxide nanomagnetic composite from Pterocladia Capillacea red algae-derived activated carbon (PCAC-IO) was synthesized by co-precipitation method using different iron salts and different base solutions. The synthesized nanocomposite was investigated with various characterization techniques such as FTIR, BET, SEM-EDX, TEM, XRD, and VSM. The obtained PCAC-IO adsorbent was used for Cr(6+) ions and Mordant Violet 40 (MV40) dye removal. The adsorption mechanism of Cr(6+) ions and MV40 dye on PCAC-IO was examined using several adsorption and kinetic isotherm models. Langmuir and Freundlich models were investigated using experimental data. Pseudo-first-order (PFO), Pseudo-second-order (PSO) and intraparticle diffusion models (IPDM) were applied to identify the adsorption mechanism. It has shown that the PSO kinetic model fits better with the experimental data obtained from PCAC-IO. This result can be interpreted as the adsorption of the adsorbate on the nanocomposite as chemical adsorption. The optimum conditions for maximum Cr(6+) ions removal (96.88%) with PCAC-IO adsorbent occur at room temperature, 5 g L(−1) adsorbent concentration, 100 mg L(−1) initial pollutant concentration, pH 1 and at the end of 180 min, while maximum MV40 dye removal (99.76%), other conditions being the same, unlikely it occurred at pH 2.06 and after 45 min. The most suitable model for Cr(6+) ions removal under the conditions of 1 L(−1) g adsorbent concentration and 400 mg L(−1) adsorbate concentration was Langmuir (Q(max) = 151.52 mg g(−1)), while for MV40 removal it was Freundlich (Q(max) = 303.03 mg g(−1)). We propose the use of activated carbon-supported iron oxide prepared from bio-waste material, especially from Pterocladia Capillacea red algae, as a promising adsorbent with high efficiency in the removal of Cr(6+) ions and MV40 dye from aqueous media.