Theory and Engineering Practice of Intermittent Heat Injection-Enhanced Coalbed Methane Extraction

[Image: see text] Because of the strong adsorption characteristics of methane and the low permeability of coal seams, the extraction efficiency of coalbed methane (CBM) is very low. Here, based on the energy conservation equation, we propose the theory of heat injection-enhanced CBM extraction. We developed a device for heat injection-enhanced CBM extraction and performed an on-site heat injection test in the Chengzhuang coal mine. The results showed that when the water injection rate was 0.5 m(3)/h, the heat injection temperature was 145 °C, with two heat injections, yielding the best CBM extraction effect. This could fully utilize the heat injection equipment and achieve a fast, safe, and efficient extraction. The gas production law of the intermittent heat injection-enhanced CBM extraction method had obvious stages; the CBM concentration and daily gas production were very low during the heat injection stage but were greatly improved during the extraction stage after heat injection. The highest CBM concentration reached 100%, and the maximum daily gas production of CBM increased by 1269 times. The variation law of the cumulative gas production with time was fitted using Wang’s empirical formula. Comparative analysis showed that, compared to traditional extraction, intermittent heat injection shortened the extraction time by 6.6 years. Compared with other enhanced CBM extraction methods, the intermittent heat injection method had obvious technical advantages and greater improvements in concentration and CBM extraction speed. Therefore, the results are of great significance for improving the recovery rate of CBM and for reducing greenhouse gas emissions.