The Dissolution Mechanism of Low-Molecular-Weight Organic Acids on the Sillimanite

The interaction between low-molecular-weight organic acids (LMWOAs) and minerals in nature has been widely studied; however, limited research has been conducted on the dissolution mechanism of sillimanite in the presence of different organic acids. In this study, the interaction between the sillimanite sample and LMWOAs (citric acid, oxalic acid, and citric/oxalic mixture) at the same pH was investigated. The dissolution rate of Si and Al was high during the initial reaction time, then slowed down in the presence of LMWOAs. The dissolution data for Si and Al from sillimanite in the LMWOAs fit well with the first-order equation (C(t) = a(1 − exp(−kt))) (R(2) > 0.991). The dissolution process of sillimanite in the organic acids was controlled by the surface chemical reaction step. The dissolution concentration of Si in aqueous citric acid was higher than that in oxalic acid. In contrast, the dissolution concentration of Al in oxalic acid was more than that in citric acid. The maximum concentrations of Si and Al in the presence of composite organic acids were 1754 μmol/L and 3904 μmol/L. The sillimanite before and after treatment with LMWOAs were studied using X-ray diffraction (XRD) and scan electron microscopy (SEM). These results are explained by the characterization of the sillimanite. Under the single acid solution, the (210) crystal plane with a high areal density of Al in sillimanite was easily dissolved by the oxalic acid, while the (120) in sillimanite with a high areal density of Si was more easily dissolved by citric acid. In the composite organic acids, the Si-O bond and Al-O bond in sillimanite were attacked alternately, leading to the formation of some deeper corrosion pits on the surface of sillimanite. The results are of interest in the dissolution mechanisms of sillimanite in the low-molecular-weight organic acids and the environmentally friendly activation of sillimanite.