Development and Experiment of an Innovative Row-Controlled Device for Residual Film Collector to Drive Autonomously along the Ridge

The field harvesting process of harvesting machinery is often affected by high workload and environmental factors that can impede/delay manual rowing, thereby leading to lower efficiency and quality in the residual film collector. To address this challenge, an automatic rowing control system using the 4mz-220d self-propelled residual film collector as the experimental carrier was proposed in this study. Cotton stalks in the ridges were chosen as the research object, and a comprehensive application of key technologies, machinery, and electronic control was used, thereby incorporating a pure tracking model as the path-tracking control method. To achieve the automatic rowing function during the field traveling process, the fuzzy control principle was implemented to adjust the forward distance within the pure tracking model dynamically, and the expected steering angle of the steering wheel was determined based on the kinematic model of the recovery machine. The MATLAB/Simulink software was utilized to simulate and analyze the proposed model, thus achieving significant improvements in the automation level of the residual film collector. The field harvesting tests showed that the average deviation of the manual rowing was 0.144 m, while the average deviation of the automatic rowing was 0.066 m. Moreover, the average lateral deviation of the automatic rowing was reduced by 0.078 m with a probability of deviation within 0.1 m of 95.71%. The research study demonstrated that the designed automatic rowing system exhibited high stability and robustness, thereby meeting the requirements of the autonomous rowing operations of residual film collectors. The results of this study can serve as a reference for future research on autonomous navigation technology in agriculture.