Wastewater Treatment for Carbon Dioxide Removal

[Image: see text] Wastewater treatment is notorious for its hefty carbon footprint, accounting for 1–2% of global greenhouse gas (GHG) emissions. Nonetheless, the treatment process itself could also present an innovative carbon dioxide removal (CDR) approach. Here, the calcium (Ca)-rich effluent of a phosphorus (P) recovery system from municipal wastewater (P recovered as calcium phosphate) was used for CDR. The effluent was bubbled with concentrated CO(2), leading to its mineralization, i.e., CO(2) stored as stable carbonate minerals. The chemical and microstructural properties of the newly formed minerals were ascertained by using state-of-the-art analytical techniques. FTIR identified CO(3) bonds and carbonate stretching, XRF and SEM-EDX measured a high Ca concentration, and SEM imaging showed that Ca is well distributed, suggesting homogeneous formation. Furthermore, FIB-SEM revealed rhombohedral and needle-like structures and TEM revealed rod-like structures, indicating that calcium carbonate (CaCO(3)) was formed, while XRD suggested that this material mainly comprises aragonite and calcite. Results imply that high-quality CaCO(3) was synthesized, which could be stored or valorized, while if atmospheric air is used for bubbling, a partial direct air capture (DAC) system could be achieved. The quality of the bubbled effluent was also improved, thus creating water reclamation and circular economy opportunities. Results are indicative of other alkaline Ca-rich wastewaters such as effluents or leachates from legacy iron and steel wastes (steel slags) that can possibly be used for CDR. Overall, it was identified that wastewater can be used for carbon mineralization and can greatly reduce the carbon footprint of the treatment process, thus establishing sustainable paradigms for the introduction of CDR in this sector.