Physical and CFD model used in the analysis of particles dispersion

Air pollution, representing one of the major environmental crises affecting us all, is responsible for half a million deaths each year in Europe. This research shows a numerical model based on Computational Fluid Dynamics (CFD) and a methodology for its validation allowing to know the evolution of particles in open urban environments. In this case, the model represents an area of Gijón (Asturias), specifically chosen as it serves to highlight a location at which the daily limit values of PM(10) set by the regulations are most frequently exceeded. A numerical model has been developed at a scale of 1:10,000 to simulate the dispersion of pollutants, including particulate emissions. A physical model at the same scale was built using 3D printing. This model was tested in a wind tunnel and analysed in the four main wind directions. To carry out the tests, a particle generation system was designed and manufactured, and the necessary infrastructure was built to take measurements using an optical particle meter. Results show that the numerical model meets the expected objectives and is capable of predicting the behaviour of particle dispersion in the air. The numerical model produces results in the same order of magnitude as the physical model, although there is a tendency to underestimate the maximum values with respect to the measured ones.