Computed Tomography-Based Coronary Artery Calcium Score Calculation at a Reduced Tube Voltage Utilizing Iterative Reconstruction and Threshold Modification Techniques: A Feasibility Study

Background: The coronary artery calcium score (CACS) indicates cardiovascular health. A concern in this regard is the ionizing radiation from computed tomography (CT). Recent studies have tried to introduce low-dose CT techniques to assess CACS. We aimed to investigate the accuracy of iterative reconstruction (IR) and threshold modification while applying low tube voltage in coronary artery calcium imaging. Methods: The study population consisted of 107 patients. Each subject underwent an electrocardiogram-gated CT twice, once with a standard voltage of 120 kVp and then a reduced voltage of 80 kVp. The standard filtered back projection (FBP) reconstruction was applied in both voltages. Considering Hounsfield unit (HU) thresholds other than 130 (150, 170, and 190), CACS was calculated using the FBP-reconstructed 80 kVp images. Moreover, the 80 kVp images were reconstructed utilizing IR at different strength levels. CACS was measured in each set of images. The intraclass correlation coefficient (ICC) was used to compare the CACSs. Results: A 64% reduction in the effective dose was observed in the 80 kVp protocol compared to the 120 kVp protocol. Excellent agreement existed between CACS at high-level (strength level = 5) IR in low-kVp images and the standard CACS protocol in scores ≥ 11 (ICC > 0.9 and p < 0.05). Increasing the threshold density to 190 HU in FBP-reconstructed low-kVp images yielded excellent agreement with the standard protocol in scores ≥ 11 (ICC > 0.9 and p < 0.05) and good agreement in score zero (ICC = 0.84 and p = 0.02). Conclusions: The modification of the density threshold and IR provides an accurate calculation of CACS in low-voltage CT with the potential to decrease patient radiation exposure.