Cargando…

Structure–Property Correlation in Natural Rubber Nanocomposite Foams: A Comparison between Nanoclay and Cellulose Nanofiber Used as Nanofillers

Nanocomposite foams of natural rubber (NR) with 5 phr of two kinds of nanofillers, nanoclay (NC) and cellulose nanofiber (CNF), were produced using the latex mixing method and foaming with azodicarbonamide. The effect of the nanofiller on the structure and mechanical properties of NR foams was inves...

Descripción completa

Detalles Bibliográficos
Autores principales: Wongvasana, Bunsita, Thongnuanchan, Bencha, Masa, Abdulhakim, Saito, Hiromu, Sakai, Tadamoto, Lopattananon, Natinee
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2023
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10649899/
https://www.ncbi.nlm.nih.gov/pubmed/37959903
http://dx.doi.org/10.3390/polym15214223
Descripción
Sumario:Nanocomposite foams of natural rubber (NR) with 5 phr of two kinds of nanofillers, nanoclay (NC) and cellulose nanofiber (CNF), were produced using the latex mixing method and foaming with azodicarbonamide. The effect of the nanofiller on the structure and mechanical properties of NR foams was investigated through SEM, TEM, tensile tests, WAXD, and compression set measurements. Smaller cells with a narrower distribution were attained in the NC/NR foam when compared to the NR and CNF/NR foams, and the expansion ratio was larger due to the suppression of the shrinkage in the NC/NR foam. The foaming of the NR nanocomposites reduced the size of the filler aggregates and improved the dispersion and alignment of nanofillers in the cell walls. The addition of NC and CNF enhanced the tensile strength of the NR foam by 139% and 62%, respectively, without sacrificing the excellent strain of the NR, due to the acceleration of the strain-induced crystallization and small size of the filler aggregates. The compression set of the NR foam could also be reduced in the NC/NR foam compared with the NR and CNF/NR foams.