Gating of Acid-sensitive Ion Channel-1: Release of Ca(2+) Block vs. Allosteric Mechanism

The acid-sensitive ion channels (ASICs) are a family of voltage-insensitive sodium channels activated by external protons. A previous study proposed that the mechanism underlying activation of ASIC consists of the removal of a Ca(2+) ion from the channel pore (Immke and McCleskey, 2003). In this work we have revisited this issue by examining single channel recordings of ASIC1 from toadfish (fASIC1). We demonstrate that increases in the concentration of external protons or decreases in the concentration of external Ca(2+) activate fASIC1 by progressively opening more channels and by increasing the rate of channel opening. Both maneuvers produced similar effects in channel kinetics, consistent with the former notion that protons displace a Ca(2+) ion from a high-affinity binding site. However, we did not observe any of the predictions expected from the release of an open-channel blocker: decrease in the amplitude of the unitary currents, shortening of the mean open time, or a constant delay for the first opening when the concentration of external Ca(2+) was decreased. Together, the results favor changes in allosteric conformations rather than unblocking of the pore as the mechanism gating fASIC1. At high concentrations, Ca(2+) has an additional effect that consists of voltage-dependent decrease in the amplitude of unitary currents (EC(50) of 10 mM at −60 mV and pH 6.0). This phenomenon is consistent with voltage-dependent block of the pore but it occurs at concentrations much higher than those required for gating.