Influence of stent expansion states on platelet deposition in an extracorporeal porcine arteriovenous shunt model using a multichannel perfusion chamber.

Limited data are available about incomplete stent expansion (SE) on platelet deposition (PD). We examined PD following different SE using an extracorporeal porcine arteriovenous shunt model to which a perfusion chamber with four parallel silastic tubes were connected. Blood flow was set at a 20 and 100 mL/min in 1.8 and 3.1 mm diameter tubes, respectively. P154 stents were deployed completely (Group A, n=15) or incompletely (Group B, n=15) in 1.8 mm (n=13) and 3.1 mm (n=17) tubes. 51Cr-labelled platelet autologous blood was injected 1 hr before the perfusion. After 15 min-perfusion, the testing tubes were assessed for radioactivity counts. In-stent cross sectional area was measured by intravascular ultrasound. There was a significant difference in PD between group A and B regardless of channel size (118+/-18.4 vs 261.4+/-52.1 pits x 10(6)/cm2, p<0.05). With adjusted shear rate and similar stenosis, PD was similar in both tubes. In smaller 1.8 mm tubes, a stenosis as subtle as 10% was associated with a significant PD difference (226.1+/-20 vs 112.9+/-20.5 plts x 10(6)/cm2, p<0.005). This model enabled a repetitive, simultaneous comparison of PD following different SE states. It seems that the quality of SE remains crucial in smaller channels.